Parts washers catalog UNIX LINE
| Washing capacity ( Ø x H ) | Basket load capacity | Tank | |
| 80 | Ø 78 x H 54 cm | 100 Kg | 240 lt |
|---|---|---|---|
| 100 | Ø 98 x H 54 cm | 200 Kg | 240 lt |
| 120 | Ø 117 x H 70 cm | 300 Kg | 300 lt |
Rotating basket metal parts washer with liquid decantation system
Unix is a system ideal for the automatic washing of small and medium size mechanical parts.
Washing is carried out by the action of upper, lower and side nozzles. The slow rotation of the basket is ensured by a gear motor. A PLC management enables numberless customisations thanks to a wide range of accessories.
The tank with high capacity is separate from the washing chamber, and is on the back side of the machine.
- LT (heating up to 60° C)
- HT (heating up to 80° C)
- PLC with color Touch Screen
- Industry 4.0 option
- Unique tank
- Mechanical engineering, chip removal, foundries, moulding
- Surface treatment, pre-painting, paint stripping
- Aeronautical / Space Industry
- Electronic
- Chemical, Pharmaceutical, Medical, Cosmetic, Food
Video
UNIX SZD parts washers are washing machines for small and medium-size parts.
The washing process can be fully customized thanks to an intuitive software ensuring washing, blowing and drying thanks to the accessories installed.
This model features are the rear tank, physically separated from the washing chamber.
An additional filtering through cap filters and a very big tank ensure a longer washing time and an easy maintenance.
UNIX SZD parts washers are equipped with standard steam extraction to avoid operators being damaged from an excessive quantity of steam.
- Timed electric exhaustion of steam
- Hatch closure assisted with gas springs and fastening hook
- Siemens® electric power parts
- 4” color touchscreen display for settings and programs
- Box filter made up of 6 Aisi 304 SS vertical filters for pre-filtration of the liquid flowing back into the tank
- Aisi 304 stainless steel filter in pump intake
- Tank border gasket
- Structure and sheet metal in contact with liquid in Aisi 304 stainless steel
- Minimum level switch
- Safety limit switch on cover opening
- Stainless steel electric pump with special seals
- Weekly programming to start heating and deoiler (if installed)
- IP65 electrical system, management via PLC touchscreen (DGT V4)
- Heating of the liquid with stainless steel electric heating element
- Mechanical rotation of basket via gearmotor
- Internal welding bleaching
- Tanks accessible from the outside
- Stainless steel bottom section load-bearing structure
- Aisi 304 stainless steel washing pipelines with professional stainless steel flat nozzles
- Drain valves for emptying tanks
- Manual water filling valve
HT VERSION
- Heat insulation with Aisi 430 stainless steel panels
- Safety limit switch with cover opening lock during cycles
- Panels under basket with grease and solids collection sump filters
- Maximum liquid level control in tank 1 and filling solenoid valve
- Compressed air blowing
- Hot air drying with resistor and air blade side channel blower
- Demineralizer with mixed resins and conductivity meter
- Pneumatic cover opening and closing with two-hand safety control unit
- Centrifugal steam condenser S mobile version
- Two-hands control for basket rotation with opened lid
- Stainless steel Aisi 304 external trolley with drops-catcher, wheels and safety brakes [C]
- Additional basket/platform in stainless steel
- Stainless steel Aisi 304 additional external trolley
- Automatic liquid detergent dispenser, installed in bath 1
- Disc oil separator with dedicated motorization
- External pneumatic oil separator
- Bag filter in stainless steel, installed in the bath 1
- Magnetic spark plug for bag filter for ferrite powder
- Idle lower rotating group in stainless steel
- Idle upper rotating group in stainless steel [C]
- Device for remote connection and remote support for HMI Weintek
- Kit for Industry 4.0 for HMI Weintek
- Manual washing and blowing with hoses and washing nozzle
- 80 bar manual washing and blowing with hoses and washing nozzle (both for LT or for HT available)
- Kit for use with abrasive contaminants in the washing liquid
- Stainless steel fittings and valves kit ( for parts that are in contact with liquids)
- PLC Siemens® S7 1200 - HMI touchscreen Weintek
- High pressure washing pump
- Stainless steel Aisi 304 retention tank with drip-catcher
- Upper ramp fastened to the cover
- Nebulized rinse from water mains, draining into the washing tank
- Emptying pump
- Signal tower for indicating system status
- Pipes with blade-nozzle in stainless steel 1/8"
- Workpieces positioning /clamping pallet
ACCESSORIES NOTES LEGEND
C: the useful washing height is reduced by 130 mm
